Ph meter Milwakee Ph 600 (model Made in Europe )

Ph meter Milwakee Ph 600 (model Made in Europe )

This Ph meter has a 1-point calibration that you can perform with a pH 4 or pH 7 calibration solution.

It is very easy to use, and its display will quickly show the pH value of the liquid being tested. Batteries are included and their operating time is about 700 hours.

pH meter Eco Milwaukee

This PH meter has a non-replaceable but nevertheless precise and durable electrode if a few basic rules are respected for many uses.

First of all, when opening the cap of the PH600 there may be white crystals around the probe, this is not alarming, it is just the residue of the preservative solution used by Milwaukee after the factory calibration. A simple rinse with water will remove them.

This pH meter should always be stored upright when not in use, and an electrode storage solution should be placed in the cap to prevent it from drying out.

After each measurement, the electrode should be placed under water. If the electrode is soiled or covered with a film of residue, a suitable cleaning solution must be used. Do not use distilled water.

Specifications of the PH tester: PH 600
pH Range: 0.0 to 14.0 pH
Resolution: 0.1 pH
Accuracy at 20°C: ± 0.1 pH
Environment: 0 to 50°C or 32 to 122°F – max RH 95%.

Cliquez ici: Manuel d’utilisation du pH600