Ionizador MARTIN 2W – Airbutler

The Martin room air purifier consumes very little energy, only 2W. It works with a 12V adapter included, but also has a battery compartment (6xD#) useful for safe operation in very humid rooms (battery life not included 6 months).

Healthy, pollution-free air

Thanks to its air purification technology, the Martin Ionizer guarantees maximum effectiveness against the removal of dust particles, microscopic organisms (bacteria, pollen, etc.) and odors.

Through its generator that produces anions (negatively charged ions) it is able to remove all particles suspended in the air and purify it. The active oxygen produced is able to banish all viruses, mites…

After a few days of use, you will see a significant deposit of contaminants in the dust collector located inside the unit. This collector should be cleaned at least once a month with warm water and a little dish detergent and then dried before putting it back in place.

Martin Ionizer Settings

It can be used in LOW or HIGH mode depending on the indoor air pollution.

LOW mode: As soon as the Airbutler is plugged in, it operates for 60 minutes and then turns off for 60 minutes. After that, it will have an operating cycle of 2 minutes every 60 minutes.
HIGH mode: It will run for 60 minutes and then turn off for 60 minutes, then it will have a 5 minute operation cycle every 60 minutes.

If odors and pollution in your indoor space are persistent, the Martin air purifier has the BRUSH mode that will run for an additional 60 minutes and then let it resume its normal cycle.

Airbutler Home Care Tips

The Martin Ionizer will effectively purify the air in your home, but it should not replace the aeration and ventilation of your interior.

Please read and follow the instructions included with the unit.

Read more:

Negative Ions: = 360,000
Active oxygen: = 0.06ppm .