Blumat Irrigation Pack 12 plants + 3 metres of hose

You can irrigate your vegetable garden with this set of 12 independent ceramic drippers from a simple water tank and the Blumat high tank connector.

This Blumat watering system works without a pump and without electricity. It is sold ready to use and contains all the parts (hose, fittings, ceramic sprinkler cores, tank connector, etc.) you need to build your independent watering system.

Blumat individual and economical irrigation

The 12 Blumat cores will be planted directly in the ground, they will serve as a moisture sensor and autonomous water diffuser via their small 3mm hose.

The 3 meters of 8mm black hose will be used to create your main irrigation line. One end should be connected to your tank via the included connector and the rest that you will cut according to your crop spacing will connect the ceramic drips.

With this 12-piece Blumat Irrigation Set, each plant is irrigated individually as required depending on the dryness of the surrounding soil. The Blumat sprinklers each have a manual flow regulator on top.

Watering line extension

If required, you can add up to 500 Blumat irrigation sensors to your existing system. To do so, simply purchase an 8mm hose reel and additional diffusion cones.
You can also connect your irrigation line directly to a tap via the Blumat pressure reducer.

This watering system is sold with a comprehensive photo instruction for starting up your irrigation line.