The Solux Ballast is an electronic transformer with power regulator, available in 250w, 400w and 600w. With this device you can adjust the intensity of the light received by your plants according to the phase they are in. You can adjust the power in 4 positions: 50%, 75%, 100% and 110% (Super Lumen).
Thus, you will be able to stretch the life of your bulbs to the maximum and give a better quality of light and a maximum gain of energy. Your plants will receive more or less 30% more light compared to a magnetic ballast.
It turns on at 100% in less than a minute and has a Plug & Play connection that will allow you to turn it on and off with a simple plug if you install it on the female of your reader .
The Plug & Play cable is included to simplify your life and allow you to connect the ballast directly to your reflector. If you need more cable length, use the Plug & Play plugs. Remember that if you cut the cable with the ballast’s Plug & Play connection, you will lose the warranty.
It incorporates a high precision, high speed heatsink system (DSP) that monitors the heat status of your ballast in real time.
Moreover, it is very quiet during its operation unless you spend your time with your ear glued to the transformer. It doesn’t weigh much and doesn’t heat, and it works with any lamp, HPS or MH. So here you have a ballast that has everything you need to run a crop.
Type of Lamp: MH / HPS
Nominal Output Power: 400W, 600W
Selectable Power: 125 – 660 W (10-110%)
Input Current: 1.5 A / 2.4 A / 3.7 A
Voltage: 240 V
Power Factor : ≥ 0,98
Operating Voltage: ≤ 4,5 KV
Total Harmonic Distortion: ≤ 10%.
Ambient Temperature : -20°C to +50°C
Carcass temperature: ≤ 80°C
Dimensions: 310 x 105 x 85 mm
Weight: 2,5 Kg
Plug & Play Cable Includes
Seuls les clients connectés ayant acheté ce produit ont la possibilité de laisser un avis.